-
Low Starting Quantity
-
Digital Proof Included
-
Design Support Available
-
In-House Production
Give every burger handoff a box that reflects the care behind the food, keeps your visual identity clear, and makes the first opening feel considered. At a busy counter or during takeout and delivery, customers may judge the order before they lift the lid. A generic carton can make a carefully built burger feel interchangeable. Custom sizing, a suitable structure, deliberate material character, and artwork across the available panels turn the box into part of the meal experience. The result is a more coherent handoff: the pack identifies the restaurant, signals the intended standard, and frames the burger when the customer opens it. We help you build a burger box around the way you serve, the impression you want to create, and the brand cues customers should notice. Whether your style is bold, craft-led, refined, or playful, the goal is a pack that feels specific to your menu rather than added at the last minute. That result is supported through product-led sizing, clamshell, tuck, window, tray, and other approved structural routes, plus paperboard, kraft, and selected corrugated options. Exterior and interior printing can carry your colors and messaging beyond the lid, while coatings and selective finishes can guide attention. Artwork checking, dieline support, and a digital proof help you review the design before production begins.
Get Custom Quote
BURGERS, BUILT TO FIT
Choose a Box That Fits the Way You Serve
The right burger box depends on more than the shape of the food. A counter handoff may call for quick, direct access; a takeout order may need a defined closure and a tidy handoff; a menu launch may benefit from a window or a more distinctive reveal. We size each route around the burger, its wrapping or inner layer, and the way the order will be handled. Then we use structure and printable surfaces to keep the restaurant’s visual language clear from the first glance to the moment the lid opens.
➜
Burger Clamshell Boxes
A hinged clamshell creates a familiar single-burger format with a clear lid-to-base reveal. Custom proportions and panel printing make it suitable for branded counter handoffs, takeout, or delivery orders.
- Single-burger configuration
- Hinged lid and base
- Printable exterior and interior
- Direct first-open access
A focused structure that connects the burger, the handoff, and your visual identity through the first opening.
Customize Now
➜
Tuck-End Burger Boxes
Straight or reverse tuck construction gives you a compact folding-carton route with useful front, back, top, and side panels. It works when you want clear menu recognition and a tidy opening sequence.
- Single-item carton format
- Straight or reverse tuck
- Multi-panel brand artwork
- Counter or takeout use
A flexible printed carton for restaurants that want clear identification without visual clutter.
Customize Now
➜
Window Burger Boxes
A die-cut or patched window can make the product part of the visual story while the surrounding board carries the restaurant name, menu cue, and color system. Window placement is planned around the approved structure.
- Visible product cue
- Custom window placement
- Printed framing around window
- Counter or takeout viewing
A more immediate product view that still leaves room for a distinctive branded frame.
Customize Now
➜
Burger Paper Trays
An open paper tray keeps the burger visible for counter service or dine-in presentation while giving the outer walls room for brand colors, short messaging, or menu identifiers. Sizing follows the burger and serving setup.
- Open single-burger format
- Product-led tray proportions
- Branded outer wall printing
- Counter or dine-in use
A direct serving format that turns a simple handoff into a visibly branded moment.
Customize NowMATERIAL SETS THE TONE
Choose the Feel Your Burger Brand Should Carry
The board is the first physical signal customers receive from a burger box. Smooth SBS paperboard can give bright colors, photography, and detailed graphics cleaner definition, which suits polished or high-energy restaurant identities. Kraft brings a more natural, craft-led character, especially when paired with strong white ink or restrained artwork. Coated or uncoated paperboard can shift the pack from crisp and vivid to simple and tactile. Supported corrugated board can add a more substantial branded character where the chosen format and serving route call for it. Select the material for the impression and handling context you need, then confirm the final specification around the burger and box structure.
SBS Paperboard: Clear, Polished Definition
Use SBS paperboard when your identity depends on crisp color, detailed graphics, or a cleaner surface character. It gives menu artwork and brand elements a controlled visual foundation, helping the finished carton feel deliberate at the counter, in a takeout handoff, or on arrival.
Kraft Paperboard: Natural, Craft-Led Character
Kraft can give the burger box a warmer, more tactile identity before any finish is added. White ink, controlled color, or simple line work can create strong contrast while preserving the material’s natural character, making it useful for brands that want a more grounded visual language.
Coated or Uncoated Board: Set the Surface Personality
A coated surface can support brighter graphics and a cleaner visual finish, while uncoated paperboard can feel more direct and tactile. The choice helps you decide whether the burger box should read as bold and polished or natural and understated.
Supported Corrugated Board: Add Physical Presence
Selected corrugated structures can give relevant burger formats more physical presence when the serving route calls for it. The flute and final construction are confirmed around the burger and approved format, while exterior printing keeps the pack visibly connected to the restaurant.
MENU AND BRAND IN VIEW
Make Every Burger Box Easy to Recognize
Customers may see the box at the counter, in a takeout handoff, or when a delivery order arrives. Printing helps those moments feel connected to the same restaurant. Use the lid to establish the main brand cue, side panels to repeat colors or a short message, and the inside to continue the identity when the burger is revealed. Full-color CMYK, PMS or spot-color control, digital and offset printing, and white ink on kraft support a wide range of visual directions. The business value is a burger range that feels coordinated, gives menu variants clearer identities, and remains recognizably yours across selected service channels.
- Give signature burgers distinct cues
- Keep every variant visibly related
- Carry identity across every panel
- Make limited menus feel intentional
- Continue the story inside
- Stay recognizable through handoff
FINISH WITH INTENTION
Guide Attention Without Overworking the Box
A finish should clarify the burger box, not compete with the food or menu message. Matte can give the outer surface a calmer, more considered character, while gloss can make bold color and graphic contrast feel more energetic. Soft-touch may suit a more refined brand direction when the selected structure and use support it. Spot UV, foil, embossing, debossing, or raised effects can then give the restaurant name or a key menu cue extra weight. Used selectively, these options help the pack feel deliberate in the hand and make the visual order easier to understand.
-
Set the Surface MoodChoose matte or soft-touch when the brand should feel calmer and more considered, or use gloss when bright color and graphic contrast should lead. The finish sets the overall character before any highlighted detail asks for attention.
-
Put the Restaurant Name First
Use spot UV, foil, embossing, debossing, or a raised effect on selected elements rather than every panel. This gives the name, symbol, or core menu cue more visual and tactile weight while keeping the box easy to read.
-
Give Limited Menus Their Own Moment
A selective finish change can distinguish a promotion or limited menu from the core range without breaking brand continuity. The goal is a noticeable shift in surface detail while the main colors, typography, and signature look remain connected.
THE REVEAL STARTS INSIDE
Make the First Opening Feel Like Part of the Meal
A burger box has only a brief opening sequence, but that moment can either continue the restaurant’s visual language or leave it at the lid. The structure should open in a clear direction, reveal the burger without a visually disconnected interior, and give the product an intentional place within the pack. Custom fit planning helps align the base, lid, and available space with the burger and any approved wrapping or inner layer. Inside printing can carry color, artwork, or a brief message into the reveal. The outcome is a handoff that feels complete from the closed box to the first view of the food.
-
Keep the Restaurant Present
Carry selected colors, artwork, or concise copy onto the inside lid or other printable interior surfaces. When the box opens, the identity established outside remains part of the customer’s first view instead of ending at the closure.
-
Give the Burger a Deliberate Place
Plan the base, lid, and internal space around the burger, its wrapping or inner layer, and the way it will be placed and removed. A product-led fit gives the reveal a more considered visual frame without relying on invented stock dimensions.
-
Shape the First View
Use the opening direction, interior contrast, and placement of brand cues to decide what the customer sees first. The goal is not a theatrical unboxing; it is a clear, appetizing introduction that carries the restaurant’s standard into the moment of access.
EXPERT-GUIDED BURGER PACKAGING
Burger Box Customization Made Easy & Fast — Built for Stacked, Saucy Servings
Our burger packaging experts, structural designers, print specialists, consultants, and project managers make custom burger box ordering easy and fast by bringing your bun diameter, burger height, patty size, topping clearance, sauce or grease exposure, serving weight, delivery needs, selected clamshell, tuck-top, tray, sleeve, window, or carton style, artwork, and brand direction into one production-ready structure. We guide food-contact stock options, grease-resistant and moisture-resistant coating choices, base stability, side-wall height, lid clearance, closure behavior, venting placement where suitable, stack behavior, divider or sauce-cup layout, label-panel spacing, barcode or QR placement, dieline alignment, bleed and safe-zone setup, cost calculation, timeline planning, prepress preparation, and 3D proof review. The result is a custom burger box that fits the serving, supports cleaner handling and takeaway presentation, carries your artwork clearly, and moves to production with fewer sizing, coating, print, structure, or approval risks.
-
Fast
Specs-to-Quote Alignment
Experts align portion size, selected fries box style, food-contact stock options, grease-resistant coating choices, artwork, cost, timeline, prepress setup, and 3D proof early — helping reduce quote delays and approval back-and-forth.
-
Exact
Portion-Fit & Scoop Structure Review
We check fry length, serving weight, portion volume, front-lip height, base width, side-wall angle, stack behavior, and open-top or closed-carton shape so the box fits the serving and functions properly.
-
Clean
Grease, Moisture & Print Check
Specialists review grease-resistant coating options, moisture handling, venting placement where suitable, dieline alignment, label or sticker-panel spacing, barcode or QR placement, and print-safe areas so your fries packaging supports cleaner presentation without artwork or structure issues.
Plan a Burger Box That Works From Quote to Handoff
Good burger packaging starts with the service moment and works backward through fit, structure, artwork, and production. These decisions help you move from an idea to an approved specification without guessing at dimensions or choosing options that do not support your menu, workflow, or brand direction.
-
Start With the Burger, Not a Stock Size
Share the finished burger’s length, width, and height, along with any wrapping, liner, or inner container that will sit inside the box. Also explain whether the pack is for a closed handoff, an open tray presentation, takeout, or delivery. These details give the structural team a practical starting point for the base, lid, closure, and removal space. No stock dimension should be assumed simply because two burgers have similar names. Finished height, wrapping, and serving method can change the fit. The final dimensions and board specification should therefore be confirmed through the approved dieline and structure rather than copied from a generic size chart.
-
Match the Structure to the Service Route
Choose the structure by what the customer and service team need the pack to do. A clamshell gives a direct lid-to-base reveal. A straight or reverse tuck carton provides multiple printable panels and a defined opening route. A window box can place the product within the visual story, while a paper tray keeps the burger visible for an open serving moment. The right choice may differ between counter service, takeout, or delivery. You do not need to force every channel into one format. The service team can compare the relevant routes and confirm which construction fits the burger, the desired handoff, and the amount of printable space your identity needs.
-
Build Artwork Around Recognition and Readability
Decide what customers should understand first: the restaurant name, the burger range, a menu identifier, or a short service message. Then assign each cue to a suitable panel. The lid can carry the main identity, side panels can extend color or supporting information, and approved interior surfaces can continue the experience when the box opens. Full-color CMYK, PMS or spot colors, digital or offset printing, and white ink on kraft are available. Artwork support can include a free dieline or template, file checking, resizing, and help with bleed and safe zones. AI, PDF, PSD, and EPS files are accepted. Any legally required or buyer-supplied food information remains the buyer’s responsibility.
-
Review the Dieline and Proof Before Production
A digital proof is available for every approved order, giving you a clear checkpoint before printing begins. Review the dimensions, panel orientation, copy, colors, inside and outside print areas, and the relationship between folds and key artwork. This is the stage to identify a misplaced logo, an incorrect menu cue, or content that sits too close to a fold. A digital proof is not a physical prototype. For a qualifying bulk or wholesale project, a physical prototype may be available, and its cost may be adjusted into the resulting order where approved. Printing begins only after the required payment, artwork approval, and structure confirmation.
-
Plan Quantity, Price, and Timing Together
Paperboard, cardstock, kraft, and supported corrugated burger-box orders may start from 50 boxes. That starting quantity does not automatically remove relevant custom sizing, printing on the inside and outside, or finishing choices, provided the selected structure and production specification support them. Per-unit pricing generally improves as quantity rises, with more visible differences often appearing around 500 units; no fixed saving percentage should be assumed. Production normally takes 4–6 business days after payment, final artwork approval, and structure confirmation. Production-ready jobs are generally planned to print and ship within 7 business days. Shipping transit time is separate, while complex multi-design orders may require a separately confirmed schedule. Bringing the quantity, number of designs, artwork status, and required date into the quote helps the team give you a more useful production plan. Bring the burger dimensions, serving route, target quantity, artwork status, and preferred material or finish direction to your quote. The team can then confirm the structure, prepare or adjust the dieline, and map the job to an approval and production plan built around the final specification.
BURGER BOX QUESTIONS
Answers Before You Size, Print, and Order
Start with the finished burger, not a generic box size. Share its length, width, and height, along with any wrapper, liner, or inner container and the way the burger will be placed and removed. The team can use those details to prepare or adjust the dieline and confirm the final structure. Because burger builds and serving methods vary, the fit should be reviewed before a size is approved. This avoids forcing the burger into a box designed for a different build or handoff.
The right style depends on how the order is handed over, viewed, and opened. A clamshell gives a direct lid-to-base reveal; a straight or reverse tuck carton offers several printable panels; a window box can bring the product into view; and a paper tray supports an open serving moment. Share your service route and preferred first impression so the structure can be matched to the burger rather than chosen by name alone.
Yes. Approved interior surfaces can carry color, artwork, or a short message so the restaurant identity continues when the box opens. Exterior printing is also available across the front, back, top, bottom, and other suitable panels. Inside printing should be planned on the dieline so folds, closures, and the first reveal work together. You will receive a digital proof to review before production begins. That continuity helps the closed pack and the first reveal feel like parts of the same brand experience.
Yes. Die-cut windows and window patching are available, and the opening can be planned in different shapes and sizes around the approved structure. A window can make the burger part of the visual story while printed board around it carries the restaurant name, colors, and menu cue. Final placement and material details should be confirmed during structural review so the window supports the intended handoff and presentation. It should add clarity, not leave the remaining panels without purpose.
Yes. Paperboard, cardstock, kraft, and supported corrugated burger boxes may start from 50 units, so a smaller restaurant can develop packaging around its own product and identity without committing to an unnecessarily large first run. Relevant sizing, exterior or interior printing, materials, and finishes remain available at the starting quantity when they suit the approved structure and production specification. This gives you room to launch or test a branded format without settling for a generic carton.
AI, PDF, PSD, and EPS files are accepted, and artwork checking is available. The support team can also help with a free dieline or template, resizing, bleed, and safe-zone preparation. A digital proof is provided for every approved order so you can check panel orientation, copy, print areas, and key design placement before printing. The digital proof is an approval step, not a physical prototype. If the artwork was created for another size, resizing support is also available before the final proof.
Production normally takes 4–6 business days after payment, final artwork approval, and structure confirmation. Production-ready jobs are generally planned to print and ship within 7 business days, but this is not a promise of seven-day delivery because shipping transit time is separate. A complex order with many designs may need a separately confirmed schedule, which should be agreed before the job moves forward.
No. Food-related material options are available, but we do not claim FDA approval or food-grade certification. Direct food contact is allowed, and grease-resistant coating is available; the final material, coating, and structure should still be confirmed for the intended burger and serving method. Any legally required food information supplied for the artwork remains the buyer’s responsibility.
CUSTOMER SUCCESS STORIES
Hear What Our Customers Say
As a small business, finding premium finishes in lower quantities was always difficult. Global Custom Packaging gave us the freedom to customize our boxes and create the distinctive, polished look we wanted without committing to a large order. We still work with them today and have expanded into multiple product variants, each with the same impressive presentation.
Jordan Blake
We sell online and in stores while regularly promoting at major events, running influencer campaigns, and launching seasonal collections. Thunder Packaging has become our dependable source for everything—from premium mailer and product boxes to sturdy influencer kits, rigid packaging, kraft boxes, and limited-edition Christmas designs. Whatever structure, material, or branded look we need, we no longer have to go anywhere else.
Avery Quinn
I never worry about how my packaging will look or whether my artwork contains typos, incorrect bleed areas, or other design errors. Their 3D previews and helpful design support give me confidence before printing. If the team notices a problem, they contact me, correct it quickly, and never charge extra for the assistance.
Cameron Reese
I’m really impressed with Global Custom Packaging’s precise, richly saturated printing and the accuracy of their die-cutting. The boxes were produced in exactly the right size, with a clean, well-formed structure and no fitting or construction issues. The finished packaging looked polished, consistent, and ready to represent our products professionally.
Morgan Taylor
I received my quote within a few hours, and once we agreed on the price, the designer responded quickly, completed the required changes, and prepared my artwork for printing. The 3D proof arrived promptly, allowing me to review everything and place my order that same day. My packaging was delivered on time, exactly as Global Custom Packaging had committed.
Harper Lane